Skip to main content

A Two Part Fixtureboard Is Comming

By 8th October 2024October 9th, 2024fresh news

A Two Part Fixtureboard Is Comming.

Avoid Expensive Same day shipping on a Changeable Fixtureboard

A Two Part Fixtureboard Is Comming, so this is for the people who are going to receive the board and install it on posts or walls etc etc.

You will need some plyboard if going onto posts and wall. Purchase marine plyboard only. Buy it slightly bigger: a good size is: 1690mm x 1210mm

This allows 15mm border around standard fixture board. Apply wood hardner to all edges and varnish first, but only varnish around 10cms in from all edges.

What’s in Your Consignments

Acrylic spacers and security style hex screws are used on changeable letter boardsThis is a two piece board that joined perfectly in the middle. The 1st larger package contains the two boards with screens, and all components in position ready to go. The 2nd package is 2 x letter trays and your sets of letters. 2 large letter sets and 2 smaller letter sets.

Just sort the letters and numbers into the compartments. You will see in one of the compartments are various components that you will need.

 

Printed Prompt Marks.

You will notice on the board are a few prompt dots printed. Use these dots to drill small screws into the middle part of the board. Apply additional screws around the whole perimeter of the board, around 20 cm apart. Use screws caps provided for the outer screws.

You may find small a few drill holes that are serving no purpose in the middle of board. Just ignore these as no action required on this board.

Components:

  1. 2 hex keys
  2. Various hex bolts
  3. Black spacers
  4. A few screw caps to finish off any screw work you will need to do

Once unpacked and the sign is up, watch this uncut video below to learn how the security screws work. DO NOT OVERTIGHTEN THE SCREWS. TURN TILL THEY START TO BITE. The middle nuts  x 2 are primarily designed to stop wind and gales ripping out the screens. These need much much less pressure applied and by overtightening you can crack the screens.

Uncut video for A Two Part Fixtureboard Is Comming:

For your first message, remove screens from left and right hand sides, ping in messages, replace screens and apply screws and spacers over nuts and tighten.

Simplify your message as much as possible, abbreviate as much as possible. When not being used during summer, remove screens and letters. This will extend the life of your board and reduce the impact of UV damage.

Clean regularly. Apply household wipe to a large letter tile and run it through the rails